List Of The Function Parameters - KERN EG 220-3NM Operating Instruction

7.2 List of the function parameters

The balance has been set to a certain standard configuration in the factory. This is
marked by a ☆ .
Function
Bar graph
Tolerance weighing
(excl. EW-120-4NM)
Zero alignment
Automatic shutoff after 3 min.
for rechargeable battery op-
eration (function is only avail-
able inrechargeable battery
mode)
Display speed
Vibratory filter
Interface
(excl. EWB models)
Weight unit
(only selectable, if the cali-
bration switch is not in the
calibration position see
Ch. 5.10)
EW/EG-N/EWB-e-1627
Display Choice
1 b.G.
☆1 On
☆0 Off
2 SEL
3 A.0
☆1 Automatic zero point correction activated.
4 A.P.
☆1 Automatic shutoff activated for rechargea-
5 rE.
☆3
6 S.d.
☆2
7 I.F.
☆1 6-digit data format (excl. EW-120-4NM)
1☆01 (g)
2☆14 (ct)
15 (oz)
16 (lb)
17 (ozt)
18 (dwt)
19 (grain), (excl. EWB models)
81
↓
1A (tl Hong Kong)
S.u.
1b (tl Singapore,Malaysia)
85
1C (tl Taiwan)
1d (mom)
1E (to)
3☆20 (Pcs)
4☆IF (%)
5☆00 Unit not set (can not be set at 81.S.u.)
Description of the choice
possibilities
0 Off
1 On (chap. 7.2.1)
0 No zero point correction
0 Automatic shutoff deactivated for re-
chargeable battery operation (optional).
ble battery operation (optional).
0 Setting for metering
1 Sensitive and fast
2
↓
4
5 Non-sensitive but slow
1 Sensitive and fast (very tranquil installation
location).
↓
3
4 Non-sensitive but slow (very unsettled
installation location).
5 only EW-120-4NM
6 only EW-120-4NM
0 Interface not active
2 7-digit data format (chap. 7.2.2)
excl. EW-120-4NM
excl. EW-120-4NM
47