Advertisement
OPERATION FEATURES
Plug the power cord in and you will hear a "Beep". The small, inner circle will turn green - this
indicates the air purifier is in standby mode. Use your hand to wave over the sensor, this waving
motion turns the unit on & off, and can also adjust the fan speed.
(Wave 1) Wave your hand the 1st time and the green circle will turn
white - low speed.
(Wave 2) Wave a 2nd time, the second circle will light up - medium speed.
(Wave 3) Wave a 3rd time, the third circle will light up - high speed.
(Wave 4) Wave a 4th time, all the circles light up white - turbo speed.
(Wave 5) Wave a 5th time, the first circle (green light) and the
second circle ( white light) will light up together. This is Auto Mode -
the unit will operate on low speed and will adjust speeds accordingly
base on what pollution the sensors pick un in the air.
(Wave 6) Wave 6th time, the unit goes back to standby Mode and the
inner circle turns back to green.
Hover & hold your hand over the sensor for 2 seconds and this will lock the unit at the
desired speed. This will prevent accidental or unwanted speed changes. To unlock this feature,
hover & hold your hand over the sensor again for 2 seconds.
10
Hide quick links:
Advertisement
Need help?
Do you have a question about the JADE and is the answer not in the manual?
Questions and answers
Why does it sometimes turn red even though air quality shows 000?
The Surgically Clean Air JADE turns red when the air quality shows 000 because the different colors indicate air quality levels: Green for Good, Orange for Unhealthy, and Red for Hazardous. If the indicator is red, the device has detected hazardous air quality despite the display showing 000, which may indicate a sensor issue or a temporary discrepancy in readings.
This answer is automatically generated