Siemens SINUMERIK 802C base line Technical Manual page 4

®
SINUMERIK
Key to editions
The editions listed below have been published prior to the current edition.
The column headed "Note" lists the amended sections, with reference to the previous edition.
Marking of edition in the "Note" column:
A ... ... New documentation.
B ... ... Unchanged reprint with new order number.
C ... ... Revised edition of new issue.
Edition
2000.04
2002.01
2003.08
Trademarks
®
SIMATIC , SIMATIC HMI
trademarks of SIEMENS AG.
Other names in this publication might be trademarks whose use by a third party for his own purposes may violate
the registered holder.
Copyright Siemens AG 2003. All right reserved
The reproduction, transmission or use of this document or its con-
tents is not permitted without express written authority. Offenders will
be liable for damages. All rights, including rights created by patent
grant or registration of a utility model, are reserved.
Siemens-Aktiengesellschaft.
Documentation
Order No.
6FC5597-3AA20-0BP1
6FC5597-3AA20-0BP2
6FC5597-4AA21-0BP0
® ®
, SIMATIC NET , SIMODRIVE
Note
A
C
C
® ®
, SINUMERIK , and SIMOTION
Exclusion of liability
We have checked that the contents of this document correspond to
the hardware and software described. Nonetheless, differences
might exist and we cannot therefore guarantee that they are com-
pletely identical. The information contained in this document is re-
viewed regularly and any necessary changes will be included in the
next edition. We welcome suggestions for improvement.
© Siemens AG, 2003
Subject to technical changes without notice.
SINUMERIK 802S/802C base line
®
are registered