Setting Data - Siemens SINUMERIK 802C base line Technical Manual

6.1.5

Setting data

Number MD Name
Unit Name, Miscellaneous
HW / function Standard value
41110 JOG_SET_VELO
mm/min Axis speed for JOG
_always 0.0
41200 JOG_SPIND_SET_VELO
rev/min Speed for spindle JOG mode
_always 0.0
43210 SPIND_MIN_VELO_G25
rev/min Progr. spindle speed limitation G25
_always 0.0
43220 SPIND_MAX_VELO_G26
rev/min Progr. spindle speed limitation G26
_always 1000
43230 SPIND_MAX_VELO_LIMS
rev/min Spindle speed limitation with G96
_always 100
52011 STOP_CUTCOM_STORE
Alarm response for TRC and feedforward stop
– 1
SINUMERIK 802C base line
Start-Up
Minimum value
0.0
0.0
0.0
0.0
0.0
0
Technical Appendix
Activated
Maximum value D type
Immediately
plus DOUBLE 4/4
Immediately
plus DOUBLE 4/4
Immediately
plus DOUBLE 4/4
Immediately
plus DOUBLE 4/4
Immediately
plus DOUBLE 4/4
Immediately
1 BOOLEAN 4/4
User
class
6-15