1.It will display
is less than 85 dB
2.When C/N>=50dB
"50dB".
3.When C/N<=20dB
4.If you want to test C/N again, you must
press C/N for three times.
5.The carrier-off test mode is more exact. If
you want to get an accurate testing result
you need a spectrum analyzer and shut off
the modulation when testing.
V.Voltage Test
Press CH/F in SINGLE FREQUENCY TEST mode to
access TRUNK/BATTERY VOLTAGE test mode.
Err
when the carrier level
"
"
V.
μ
it always displays
,
it displays "20dB".
,
15
Need help?
Do you have a question about the DS2002 and is the answer not in the manual?
Questions and answers