Deviser DS2002 Operation Manual page 13

monitor function is active, you can listen to the
sound of channel 8 through the speaker.
Example 3：
Test the RF level and the sound on 106.80MHz
1. Access the LEVEL mode by pressing CH/F key.
2. Press CH/F again to toggle in frequency test
mode.
3. Press
4. Press
then it shows XXX.8MHz.
5. Press
frequency to XX6.8 MHz.
6. Press
frequency to X06.8MHz.
7.
Press
frequency to 106.8MHz.
8.
The level is tested and shown on the right of the
screen, meanwhile the sound monitor function
automatically starts, the built-in speaker plays the
sound of the current frequency.
10
or to adjust the 10KHz bit as 0.
or to adjust the 100KHz bit as 8,
till the 1MHz bit blinks, adjust the
till the 10MHz bit blinks, adjust the
till the 100MHz bit blinks, adjust the