Product Specifications - Auto Test AUTOmonitor Manual

AutoMonitor User Manual Version 7.22
10.

PRODUCT SPECIFICATIONS

Tri-axial acceleration resolved
to
Maximum angular velocity
Angular velocity accuracy
Maximum acceleration
Acceleration accuracy
GPS receiver type
Horizontal position accuracy
GPS Time to first fix
Frequency response
Temperature stability
Temp. compensation accuracy
Outputs
Warning lamp
Danger lamp
Digital interface
GPRS interface
Live GPS tracking resolution
Historical GPS
Built-in thermal printer
Paper width
Paper roll size
Memory retention
Radiated RF emissions
Compliant with
Operating temperature
Humidity
Dimensions (h  d  w)
Vehicle Unit (VU)
Rollover sensor
Driver's Aid
Supply Voltage
Power consumption
Suspension performance
Brake Performance
Detailed speed log
The replacement of any components must be carried out by AutoTest™ Products or an Authorised
AutoTest Products Service Centre.
Forward, Lateral and Vertical vectors
 250 /s
1 %
 2g
< 2 %
50 channels
GPS L1 frequency, C/A Code
GPS
Cold start
Warm start
Hot start
0 – 5 Hz
Internally compensated
5 %
Speaker: 85 dBA @ 1 m
40 mcd
70 mcd
RS232C-standard 9 pin
Broadband modem
2 m
Audit trail analysis
10,000 track points
58 mm
Max.  32 mm
5 years
SAEJ1113 Class 3
SAE J1455, ISO 7736
-10 o to +70 o C
Up to 90% non-condensing
60 mm  188 mm x 188 mm
(Complies with ISO 7736)
60 mm  135 mm x 80 mm
40 mm  115 mm x 90 mm
12 – 28 V
300 mA
500 mA
Damping ratio, overall rating
Max. deceleration, avg. deceleration,
MFDD
24 hour recording at 1 Hz
2.5 m
26 s
26 s
1 s
(Standby)
(Typical)
Page 68 of 70