AutoMonitor User Manual Version 7.22
3.1.4.1.1.1 Driving ()
Driving activity is automatically set when the vehicle is moved. Driving state is only set for the card
in the driver's slot (Slot 1), while the activity for the co-driver slot is set to Availability while the
vehicle is moving. When the vehicle stops, the activity for the card in the driver slot is changed to
Work, whereas the activity for the card in the co-driver slot is kept at Availability.
3.1.4.1.1.2 Work ()
Work activity is automatically set when the vehicle has come to a stationary point after the activity
of driving for driver slot. Work activity can be manually set by the user when the vehicle is
stationary.
3.1.4.1.1.3 Availability ()
Availability is selected automatically for co-driver slot when the vehicle is moving. Users can
manually select this activity when the vehicle is stationary.
3.1.4.1.1.4 Break/Rest ()
Break/Rest activity can be manually set by the user when the driver intends to take rest and the
vehicle is stationary.
3.1.4.1.1.5 Continuous Break
Continuous Break period is the accumulated period of continuous 15 minutes or over for activities
of Break/Rest, Availability, and Unknown period since the last Driving or Work activity. For
continuous driving of over 4h30 minutes, a continuous break of 45 minutes or over is required.
3.1.4.1.1.6 Continuous Driving
Continuous driving period is the accumulated period of driving since the continuous break period
of 45 minutes or over. When the continuous break period is reached to 45 minutes or above, the
continuous driving period will be reset to zero at the next driving activity.
If continuous driving period is reached to 4h15 minutes, the device will turn on Attention LED and
will display a notification message to inform the driver to take 45 minutes break/rest.
When the continuous driving period is reached to 4h30 minutes, the device will display another
notification message and the attention LED will stay on blinking once per second.
Page 13 of 70
Need help?
Do you have a question about the AUTOmonitor and is the answer not in the manual?
Questions and answers