Page 3
Congratulations on your choice of an AutoLight Light Transmission Meter. Please take the time to read this User's Guide before using the AutoLight™ Meter in the field. Incorrect or inappropriate use of this instrument may void the warranty. Retain the packing materials for future shipping and transport of the unit for periodic calibration.
Page 4
4. OPERATION 4.1 Operating Conditions and Set-up AutoLight has a photocell built into the light sensor tube and a constant light source built into the light source tube. These components are fragile. Care should be taken when handling the unit and should not be dropped or violently shaken. Avoid taking measurements in strong sunlight as stray light may affect the reading accuracy.
Page 5
6. CALIBRATION AutoLight will require calibration at intervals of two years (one year for UK) or as required by your local Authority. Calibration can only be carried out by AutoTest Products Pty Ltd or by an Authorised Service Centre.
Page 6
Authorised Service Centre is not responsible for incidental or consequential damages resulting from the breach of any express or implied warranty, including damage to property and, to the extent permitted by law, damages for personal injury. AutoLight User Manual Version 3 – July 2020 Page 4...
Page 7
NOTES: Copyright 2020 AutoTest Products Pty Ltd ABN 47 005 712 005. ® denotes a trademark owned by AutoTest Products Pty Ltd ABN 47 005 712 005 TEST AUTO Products Pty Ltd 61-63 Parsons St Kensington VIC 3031 Australia Phone: (+61 3) 8840 3000 Service: (+61 3) 8840 3016 service@autotest.net.au Sales:(+61 3) 8840 3017...
Need help?
Do you have a question about the AutoLight and is the answer not in the manual?
Questions and answers