Table of Contents
Advertisement
AutoMonitor User Manual Version 7.22
When AutoMonitor detects that multiple cards are inserted into its two slots, the AutoMonitor will
compare the card type of each card with the possibilities of card conflict listed in Table 5. If a card
conflict is detected, an event notification will be triggered.
Card Conflict
No Card
Driver Card
Control Card
Workshop Card
Company Card
When a vehicle starts driving, the AutoMonitor will check the appropriateness of each card
inserted into the card slots according to the possibilities listed in Table 6. If AutoMonitor detects
that vehicle is driven without an appropriate mode, a 'driving without an appropriate card' event will
be triggered.
Driving without an
appropriate card
No Card
Driver Card
Control Card
Workshop Card
Company Card
Table 6: Scenarios when 'Driving without and appropriate card' event is raised
For example, the AutoMonitor will register 'driving without an appropriate card' event when the
vehicle moves while there is a driver's card in the driver's slot along with any other card in the co-
driver's slot.
No Card
Driver Card
X
Table 5: Scenarios when Card Conflict event is raised
No Card
Driver Card
X
X
X
X
X
X
X
X
Driver Slot
Control Card
Workshop card
X
X
X
Driver Slot
Control Card
Workshop card
X
X
X
X
X
Company Card
X
X
X
X
X
X
X
Company Card
X
X
X
X
X
X
X
X
Page 19 of 70
Advertisement
Table of Contents
Need help?
Do you have a question about the AUTOmonitor and is the answer not in the manual?