Table of Contents
Advertisement
AutoMonitor User Manual Version 7.22
3.1.4.1.2 Specific conditions
Specific conditions are set by the drivers to indicate activity other than the four activities mentioned
above. The specific conditions include the following activities:
• Out of scope (begin/end)
• Ferry / Train Crossing
Specific condition can be selected by accessing the Tachograph menu.
Tachograph
When ferry/train crossing condition is selected, the condition will be automatically cleared when
the vehicle is driven. The specific condition will automatically be cleared when a card in the driver-
slot is inserted or removed.
3.1.4.1.3 Places
Drivers and co-drivers can manually select the place where the work starts and ends. Whenever a
driver card is inserted into the device, the device will prompt the user to select the location of the
place where the work begins. When the card is ejected from a slot, the device will prompt the user
to select work end place. Users can manually select place using the Tachograph menu and then
selecting Places Entry menu.
Tachograph
Place Entry
Place Begin
Place
Location name
Tachograph
Spec. Cond
Tachograph
Place Entry
Place Entry
Place End
Place
Location name
Page 14 of 70
Advertisement
Table of Contents
Need help?
Do you have a question about the AUTOmonitor and is the answer not in the manual?
Questions and answers