logitrans Logiflex ELF Supplement To Instruction Manual page 5

2.0 How to operate the level control
Upwards or downwards positioning can be
chosen on the arrows (up/down).
The red lamp is on, when the level control is
active.
To set the time delay, use "Power ON".
To switch on the level control, press "Power ON",
until the green lamp (A) (placed next to "Power
ON") is flashing.
A
The green lamp flashes and then makes a break.
The flashes between the breaks can be counted
and state the time delay (number of seconds).
To set the time delay, press "Power ON".
Each press increases the time delay by one
second (one flash) up to 25 seconds. Then it
starts from one second again (one flash).
When the requested time delay has been
reached, wait for one minute, and the level
control switches off automatically. The settings
are saved.
When switching on the level control (normally)
next time, the new settings will be active.
5