Ignition 2bright Par 18 IP User Manual page 52

Operating
Resetting the device to factory
defaults
Firmware version display
2bright Par 18 IP
52
LED spotlight
1.
Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows 'Settings' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'Factory Reset' .
ð The display shows the message 'Reset Now' .
3. Confirm with [ENTER] to start the reset.
1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows 'System Info' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] until the display shows 'Firmware' .
ð The current firmware version is displayed.