Table of Contents
Advertisement
Operating
Setting constant colour
2bright Par 18 IP
40
LED spotlight
1.
Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows 'Stand Alone' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'Static' . Confirm with [ENTER].
3.
Use [UP] or [DOWN] to select an effect or a colour that you can to adjust individually.
4.
Press [ENTER] repeatedly to activate the desired sub menu.
5.
To set the intensity of the dimmer, the frequency of the strobe effect or the intensity of
the colour, use [UP] or [DOWN] to select a value between '000' and '255' .
6.
Press [ENTER] to accept the selection.
Display
'Dimmer'
'Strobe'
'Red'
'Green'
Meaning
Dimmer intensity
Strobe effect
Red
Green
Advertisement
Table of Contents
