Ignition 2bright Par 18 IP User Manual page 51

Enabling keylock
Enabling IR remote control (RC)
receiver
1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows 'Settings' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'Auto Lock' . Confirm with
[ENTER].
3.
Use [UP] or [DOWN] to choose between 'On' (keylock on) and 'Off' (keylock off).
4.
Press [ENTER] to accept the selection.
1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows 'Settings' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'IR Remote' . Confirm with
[ENTER].
3.
Use [UP] or [DOWN] to choose between 'On' (RC enabled) and 'Off' (RC disabled).
4.
Press [ENTER] to accept the selection.
Operating
2bright Par 18 IP
51
LED spotlight