Ignition 2bright Par 18 IP User Manual page 48

Operating
Setting the dimmer curve
2bright Par 18 IP
48
LED spotlight
1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows 'Settings' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'Dimmer Curve' . Confirm with
[ENTER].
3.
Use [UP] or [DOWN] to select the desired dimmer curve (display shows 'Linear' ,
'Exponential' , 'Logarithmic' or 'S-Curve' ).
4. Press [ENTER] to accept the selection.
Display
'Linear'
'Exponential'
Meaning
Linear course
Exponential course
(Square curve with a flat course at the beginning and a
steep course at the end)