Ignition 2bright Par 18 IP User Manual page 37

Selecting and configuring auto‐
matic programmes
In this operating mode you select one of the automatic programmes and configure the speed
and the dimmer intensity of the automatic programme.
1.
Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows 'Stand Alone' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'Auto' . Confirm the selection
with [ENTER].
3. Use [UP] or [DOWN] to select the desired automatic programme (display shows 'Program
1' ... 'Program 16' ). Confirm with [ENTER].
4.
Press [UP] or [DOWN] to select the desired submenu or the desired value.
The following sub menus are available:
Menu level 4
'Dimmer'
'Speed'
5. Press [ENTER] to accept the selection.
Menu level 5
'000...255'
'000...255'
Operating
Description
Dimmer intensity
Running speed from slow to fast
2bright Par 18 IP
LED spotlight
37