Ignition 2bright Par 18 IP User Manual page 50

Operating
Setting the dimmer response
2bright Par 18 IP
50
LED spotlight
1. Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows 'Settings' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'Dimmer Response' . Confirm
with [ENTER].
3.
Use [UP] or [DOWN] to select the desired response behaviour of the dimmer (display
shows 'LED' or 'Halogen' ).
4. Press [ENTER] to accept the selection.
Display
'LED'
'Halogen'
Meaning
The dimmer setting for LED is activated.
The imitation of the dimming behaviour for halogen
light is activated.