Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ignition Pico IR / Wireless
Summary of Contents for Ignition Pico IR / Wireless
- Page 1 M A N UA L Pico IR / Wireless...
-
Page 2: Table Of Contents
PI C O I R/ W I RELESS Table of contents Safety instructions ........................... 3 1.1. FOR SAFE AND EFFICIENT OPERATION ................3 Commissioning ..........................4 2.1. Charging ..........................4 Remote control ..........................5 Wireless DMX ..........................6 4.1. Setting the DMX address ......................6 Troubleshooting Pico ........................ -
Page 3: Safety Instructions
PI C O I R/ W I RELESS 1. Safety instructions This device is suitable for indoor use only. All modifications to the device will void the warranty. Repairs are to carry out by skilled personnel only. Use only fuses of the same type and original parts as spare parts. Protect the unit from rain and humidity to avoid fire and electric shocks. -
Page 4: Commissioning
PI C O I R/ W I RELESS Important: Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems. Make sure the electrical connection is carried out by qualified personnel. -
Page 5: Remote Control
PI C O I R/ W I RELESS 3. Remote control 1 increase brightness 2 lower the brightness 3 red permanently 4 green permanently 5 orange permanently 6 lime permanently 7 dark yellow permanently 8 blue-green permanently 9 yellow permanently 10 light blue permanently 11 light yellow permanently 12 sky-blue permanently... -
Page 6: Wireless Dmx
PI C O I R/ W I RELESS 4. Wireless DMX Only available if you bought the version “Pico IR Wireless“, otherwise you only can control the device with the remote control. LED display and its meaning Permanently off = not connected to the transmitter Permanently on = connected with the transmitter / DMX is transmitted 900ms on/ 100ms off = connected with the transmitter / No DMX signal 100ms on/ 100ms off = loose connection / Connection is perpared... -
Page 7: Troubleshooting Pico
PI C O I R/ W I RELESS 5. Troubleshooting Pico The unit does not turn on. Failure of one color Error Failure of the projection. Light yield reduced Possible causes Check and reaction No power supply. Check the battery voltage x Defect LED. -
Page 8: Maintenance
PI C O I R/ W I RELESS 7. Maintenance Opening the device may only be performed by technical personnel only! Remove the caps which are on the handle with a flat screwdriver. Among them are two screws, unscrew them and remove the handle. Now you can pull out the whole inner part down. - Page 9 PI C O I R/ W I RELESS Importeur: B&K Braun GmbH Industriestraße 2 D-76307 Karlsbad-Ittersbach www.bkbraun.com info@bkbraun.com 9 / 9...