Setting the behaviour on DMX
control failure
1.
Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows 'Settings' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'DMX Fail' . Confirm with
[ENTER].
3.
Use [UP] or [DOWN] to choose between 'Hold' , 'Blackout' and 'Emergency Light' , to make
the setting to be used when the DMX controller fails.
4.
Press [ENTER] to accept the selection.
Display
'Hold'
'Blackout'
'Emergency Light'
Meaning
Last DMX value is being held.
Spotlight turns off.
Emergency light is turned on.
Operating
2bright Par 18 IP
47
LED spotlight