Ignition 2bright Par 18 IP User Manual page 38

Operating
Enabling sound-control
2bright Par 18 IP
38
LED spotlight
In this mode, the unit follows the rhythm of the background music or sounds detected by the
built-in microphone.
1.
Press [ENTER] and then [UP] or [DOWN] repeatedly until the display shows 'Stand Alone' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'Sound' . Confirm with [ENTER].
3.
Press [UP] or [DOWN] to select the desired value for the microphone sensitivity (display
shows '000' ... '100' ).
4. Press [ENTER] to accept the selection.
ð The sound control is activated.
The music control may be restricted due to the closed design of the device.