Page 1
Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 2
Attach 5x CL runner tracks (F) and 5x CR runner tracks (G) to Insert 16x bolts (C) into panels [2] and [3]. Tighten with a screwdriver. panels [2] and [3] as shown with 30x screws (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 3
2x screws (B). Tighten with a screwdriver. the panel [10], attach 1x CR runner track (G) to panel [10] as shown with 3x screws (E). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 4
Attach panels [5], [6], [7], [8], [9] and [10] to panel [2] and [3] with Insert connector [12] to join panels [11]. 16x dowels (A) and secure with 16x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 5
Attach panel [1] to the unit with 6x dowels (A) and secure with 6x Slide panels [11] down along the grooves between the panels [2], [3] and [8]. locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 6
Attach panels [13] , [14] and [15] using 2x locking nuts (D). Tighten with 4x cam nuts (L). Tighten with a screwdriver. Attach 4x plastic glides (O) with a screwdriver. into the panels with a hammer as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 7
[3] and [8] to form the back of the unit as shown. Attach panel [4] to the unit with 4x dowels (A) and secure with 4x long screws (J). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 8
Insert 4x bolts (C) into panel [17]/[18]. Insert 5x bolts (C) into panel [19]. Attach panel [20] and [21] to front panel [17]/[18] using 4x locking Tighten with a screwdriver. nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 9
Attach panels [20], [21] and [23] as shown using 4x screws (B). Slide panel [22] along the grooves between the side panels [20] and Tighten with a screwdriver. [21] to form the base of the drawer. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 10
Attach DR runners (I) and DL runners (H) to the underside of panels nuts (D). Tighten with a screwdriver. [20] and [21] as shown. Secure with 4x screws (E) and tighten with a screwdriver. Complete the other drawers. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 11
Attach panels [20] ,[21] and [26] as shown using 5x screws (B). Slide panel [25] along the grooves between the side panels [20] Tighten with a screwdriver. and [21] to form the base of the drawer. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 12
[20] and [21] as shown. Secure with 4x screws (E) and tighten with as shown. Ensure the drawers slide easily along the rails. a screwdriver. Complete the other three drawers. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 13
Attach 1x safety strap (V) to the top of the back side of the unit secure with 8x screws (N). Tighten with a screwdriver. as shown using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Page 14
(V). Fasten to the wall using 1x washer (Z), 1x wall plug (X) and 1x screw (Y). Ensure unit is balanced and steady before use. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Jesse Tallboy and is the answer not in the manual?
Questions and answers