Advertisement
Quick Links
Tools Needed:
6mm Allen
Drill
Key
Driver Bit
NOTE: Anchoring to floor or wall may require additional tools and hardware. See note at end of instructions.
Components:
Review your order acknowledgement/packing slip for components and quantities specific to your configuration.
Blocks:
24"x24" Block
(4 Bolts/Nuts Included)
General Assembly
Page 1 of 4
General Assembly Instructions
5mm & 4mm
Box Level
Allen Keys
Caps, Posts, and Beams:
24"x12" Block
(4 Bolts/Nuts Included)
Square One
Ladder
Tape
Measure
End Caps
Corner Posts
X-Connectors
T-Connectors
Horizontal Beam Spanners
2 to 3
Installers
Hardware:
Leveling Glides
80mm Bolt & Nut
60mm Bolt
12mm Bolt
800.422.5727
www.IndianaFurniture.com
Advertisement
Related Manuals for Indiana Furniture Square One
Summary of Contents for Indiana Furniture Square One
- Page 1 Square One General Assembly Instructions Tools Needed: 6mm Allen Ladder 2 to 3 Drill 5mm & 4mm Box Level Tape Installers Allen Keys Measure Driver Bit NOTE: Anchoring to floor or wall may require additional tools and hardware. See note at end of instructions.
- Page 2 Square One General Assembly Instructions Caps, Posts, and Beam Usage End Cap (Horizontal) End Caps: End caps are required to strengthen Square One configurations and hide unused bolt holes. End Corner Post caps are used horizontally (even number increments) or vertically (odd number increments).
- Page 3 Square One General Assembly Instructions Hardware Usage 80mm bolt 80mm Bolt & Nut: Used for fastening blocks together. 60mm Bolt: Used to secure a block to a cap, rail, or beam. 60mm bolt 12mm Bolt: Designed to cover up any unused holes in caps, rails, or beams.
- Page 4 Additional support is required for configurations that are not free standing. Anchoring to the floor, wall, ceiling, and other furniture will require additional tools and hardware, not provided by Indiana Furniture. The installer is responsible for sourcing hardware and for the installation of support per building conditions.