Advertisement
Quick Links
Tools Needed:
Drill
6mm Allen Key
Driver Bit
NOTE: Anchoring to floor or wall may require additional tools and hardware. See your building's facility manager for proper installation.
Components:
Review your order acknowledgement/packing slip for components and quantities specific to your configuration.
Blocks:
24"x24" Block
24"x48"
Assembled Block
24"x72"
Assembled Block
General Assembly
Page 1 of 3
5mm & 4mm
Box Level
Allen Keys
24"x12" Block
24"x36"
Assembled Block
24"x60"
Assembled Block
Square One
General Assembly Instructions
Tape
Measure
Beams, Caps, and Posts:
End Caps
Corner Posts
X-Connectors
T-Connectors
Horizontal Beam Spanners
Ladder
2 to 3
Installers
Hardware:
Leveling Glides
80mm Tool Kit
60mm Tool Kit
12mm Tool Kit
800.422.5727
www.IndianaFurniture.com
36
Advertisement
Related Manuals for Indiana Furniture Square One
Summary of Contents for Indiana Furniture Square One
- Page 1 Square One General Assembly Instructions Tools Needed: Drill 6mm Allen Key Ladder 2 to 3 5mm & 4mm Box Level Tape Driver Bit Installers Allen Keys Measure NOTE: Anchoring to floor or wall may require additional tools and hardware. See your building’s facility manager for proper installation.
- Page 2 Square One General Assembly Instructions Plan adequate space for the configuration layout and an area to sub-assemble square blocks. For configurations that need to mount to the wall or floor, locate proper placement for mounting the configuration. Once the location is measured out and leveled, pre-drill a pilot hole into the End Cap to use for connecting to the wall.
- Page 3 Square One General Assembly Instructions Next step is to connect End Caps using the 60mm connection bolt and nut (included). Your configuration may have multiple heights of End Caps. A general rule of thumb is to use the longer End Caps vertically.