Appendix C Software; System Requirements - Michell Instruments Promet EExd User Manual

Promet EExd User's Manual
Appendix C Software
Software is available for the Promet EExd to provide full remote control of up to 31
instruments. It provides access to all readable and write-able registers as described in
Appendix E, along with charting and data logging facilities.
The Promet EExd application software provides the user with advanced acquisition,
logging and charting features for full remote control and monitoring of the Promet EExd.
With this application software it is possible to:
• View all main parameters of interest
• Modify parameters
• Record parameters to a virtual chart recorder
• Record parameters to a file
• Acquire data from up to 31 process instruments
• Perform remote diagnostics
• Acquire OPC enabled remote access to all parameters and
variables
C.1

System Requirements

For a desktop computer, the following specification applies:
• Microsoft Windows 7, 98SE, ME, 2000 or XP operating system
• Spare RS232 port (normally labelled COM1, COM2 etc)
• Minimum of 64 MB of RAM (128M or higher recommended)
• Minimum of 200 MB of free hard disk space (application
approximately 3.5 MB, spare for log files)
• Intel Pentium II class processor, 200 MHz or higher
Michell Instruments
APPENDIX C
47