Heat/Cool Mode - Salus RT310SR User Manual

5.4 Heat/Cool mode *

User can set thermostat for heating or cooling. In HEAT mode thermostat is displaying flame icon all the time. When thermostat is in HEAT mode and
thermostat is CALLING for HEAT – the flame icon is flashing. In COOL mode thermostat is displaying snowflake icon all the time. When thermostat is
switched to the COOLING mode and the thermostat is CALLING for COOL – then the snowflake icon is flashing. Default mode is HEAT MODE.
NOTE: every time when thermostat need to start call for cooling then it can be delayed for about 3 minutes.
To set selected mode please follow steps below:
HOW TO SET COOLING MODE:
1
5 sec
By default thermostat is in HEATING
mode (flame icon is displaying).
To change the thermostat into the
COOLING mode – press and hold the
SNOWFLAKE button for 5 seconds.
HOW TO SET HEATING MODE:
1
5 sec
To change the thermostat into the
HEATING mode – press and hold the
SNOWFLAKE button for 5 seconds.
* Function available only from firmware version 2.1
14
2
When thermostat is switched to the
COOLING mode – the snowflake icon
is steady ON. If thermostat is CALLING
for COOL – then the snowflake icon is
flashing.
2
When thermostat is switched to the
HEATING mode – the flame icon is
steady ON. If thermostat is CALLING
for HEAT – then the flame icon is
flashing.