About This Documentation; Overview On Target Groups And Product Phases - Bosch rexroth IndraControl XM21 Operating Instructions Manual

IndraControl XM21, XM22 Controls

1 About this documentation

Editions of this documentation
Edition Release
Date
Edition 01 2014-07
Edition 02 2016-08
Edition 03 2017-03
Edition 04 2019-11
Tab. 1-1: Change Record

1.1 Overview on target groups and product phases

In the following illustration, the framed activities, product phases and target
groups refer to the present documentation.
Example: In the product phase "Mounting (assembly/installation)", the target
group "mechanic/electrician" can execute the activity "install" using this docu-
mentation.
Product
Selection
phases
Presales Aftersales
Design engineer
Programmer
Technologist
Target
Process
groups
specialist
Select
Prepare
Activities
Design
Construct
Fig. 1-1: Assigning the present documentation to the target groups, product phases and ac-
tivities of the target group
This document instructs the technical staff of the machine manufacturer on how
to safely perform the mechanical and electrical installation and on how to com-
mission the device.
Note
First edition
General revision and corrections
Notes on the explosion protection (Atex) supplemented for XM22
Notes on the explosion protection removed, supplements
Mounting
Engineering
(assembly/installation)
Mechanic/
electrician
Commissioning engineer
Unpack Parameterize
Mount Program
Install Configure
Simulate
About this documentation
Commissioning Operation
Programmer
Technologist
Process specialist
Machine
operator
Maintenance
technician
Service
Optimize Operate
Test Maintain
Remove
Create
the NC program
R911340667_Edition 04 Bosch Rexroth AG
1/69
Decommissioning
Mechanic/
electrician
Disposal company
Dismount
Dispose
faults