About This Documentation; Validity Of The Documentation; Required And Supplementary Documentation; Representation Of Information - Bosch Rexroth VT-HMC 1X Series Operating Instructions Manual

1 About this documentation

1.1
This documentation is valid for the digital axis control VT-HMC of series 1X.
This documentation is intended for fitters, operators, service technicians, system
operators and machine manufacturers.
This documentation contains important information on the safe and proper
mounting, transport, commissioning, operation, use, maintenance, demounting
and simple troubleshooting of the product.
▶ Read this documentation thoroughly, especially Chapter 2 "Safety instructions"
1.2
▶ The product must not be commissioned until you have been provided with the
Tabelle 1: Required and supplementary documentation
Title
Digital axis control, type VT-HMC...1X
Online help in commissioning software IndraWorks
Rexroth HydraulicDrive HDS-16, HDx-17 to HDx-20,
Parameters
Rexroth HydraulicDrive, Functions
Rexroth HydraulicDrive HDS-16, HDx-17 to HDx-20,
Diagnostic Messages
Rexroth HydraulicDrive, Rexroth IndraMotion MLD
(2G)
Rexroth HydraulicDrive, Rexroth IndraMotion MLD
(2G), Libraries
Release Notes
1.3
In order that this documentation allows you to work directly and safely with your
product, standardized safety notes, symbols, terms, and abbreviations are used.
For a better understanding, they are explained in the following sections.
1.3.1
In this documentation, safety instructions precede a sequence of activities
whenever there is a risk of personal injury or damage to equipment. The hazard
avoidance measures described must be observed.
Safety instructions are structured as follows:
About this documentation | Digital axis control VT-HMC...1X

VALIDITY OF THE DOCUMENTATION

and Chapter 3 "General notes on damage to property and damage to the
product", before working with the digital axis control.

REQUIRED AND SUPPLEMENTARY DOCUMENTATION

documentation marked with the book symbol
observed it. The documentations can be found on the product site or at www.
boschrexroth.com/mediadirectory.
Document number
RE 30239
RE 30330-PA
www.boschrexroth.com/hmc
RE 30338-FK
www.boschrexroth.com/hmc
RD 30330-WA
www.boschrexroth.com/hmc
RE 30336-AP
www.boschrexroth.com/hmc
RE 30336-RE
www.boschrexroth.com/hmc
RD 30330-RN
www.boschrexroth.com/hmc

REPRESENTATION OF INFORMATION

Safety instructions

and you have understood and
Document type
Data sheet
Integrated help
Parameter description
Functional description
Description of diagnostic
messages
Application manual
Library description
Firmware Release Notes
RE 30239-B, Edition 01.2021, Bosch Rexroth AG
5/36