About This Documentation; Validity Of The Documentation; Required And Supplementary Documentation - Bosch rexroth M1-16 Series Instruction Manual

Table 1: Required and supplementary documentation
Title
Technical data sheet
Contains the permissible technical data.
Please bear in mind that different technical data sheets apply
depending on the series:
Open-center control block MO-16, 22, 32
Open-center control block MO-40
Open-center control block MO-52
Open-center control block M1
Open-center control block M8
Open-center control block M9
Open-center control block ROM8
Open-center control block SM
Closed-center control block RCS30
Closed-center control block RCS35
Load-sensing control block M4-12
Load-sensing control block M4-15
Load-sensing control block M4-22
Load-sensing control block SP-08
About this documentation | Control blocks for mobile applications

1 About this documentation

1�1 Validity of the documentation
This documentation is valid for the following products:
• M1
• M4
• M6
• M7
• M8
• M9
• MO
This documentation applies to all control blocks of the named series, regardless of
their manufacturing date up to a new revision of this document.
This documentation is intended for machine manufacturers.
This documentation contains important information on safe and proper transport,
installation and disassembly, commissioning, operation, maintenance and servicing
of the product.
▶ Read this documentation completely and in particular the chapters entitled 2
"Safety instructions" page 9 and 3 "General instructions on property
damage and product damage" on page 15 before you start work with the
control block.
1�2 Required and supplementary documentation
▶ Only commission the product if the documentation marked with the
book symbol is available, understood and complied with.
• RCS
• ROM8
• RS
• SM
• SP
• SX
Document number
64354
64370
64373
64263
64294
64303
66162
64122
64155
64157
64276
64283
64279
64139
RE 64025-B/2021-08-12, Bosch Rexroth AG
5/54
Document type
Data sheet