Standards - Bosch rexroth IndraControl XM21 Operating Instructions Manual

10/69

Standards

Current consumption of the control without the
connected S20 I/O modules from U
voltage
Power consumption of the control incl. the con-
nected S20 I/O modules from U
age
Power consumption of the control without the con-
nected S20 I/O modules from U
age
Reverse voltage protection of the supply voltage
Fuse protection
Transient protection
Pulse load up to 1,500 W
Voltage dips at current supply interfaces
Electrical isolation
24 V supply U to the functional earth
LS
Electrical isolation and isolation of the voltage
ranges
24 V supply for XF1, XF2 and XF5
XF1 to XF2 and XF5
XF2 to XF5
Tab. 7-2: Operating voltage and current consumption
NOTICE
The power supply unit has to be able to deliver the quadruple nominal current of
the protective fuse to ensure that the fuse reliably triggers in case of an error.
8 Standards
The products have been developed according to the German edition of the
standards published at the time of product engineering.
Bosch Rexroth AG R911340667_Edition 04
Typically 1.0 A
at nominal
LS
36 W max.
at nominal volt-
LS
Typically 24 W
at nominal volt-
LS
Diode
Internal protective fuse, 2.5 A
Present, suppressor diodes
PS2 < 10 ms, evaluation criterion A
No separation between 0 V of the U
(housing)
1,200 V DC, 1 min.
1,200 V DC, 1 min.
1,200 V DC, 1 min.
Electronic damage due to polarity reversal or
due to a nominal current that is too low
IndraControl XM21, XM22 Controls
and FE
LS