Led Block Of 10 - Bosch rexroth IndraControl XM21 Operating Instructions Manual

36/69
Device description
LED Color
U Green
L
ON Green
ON Red
T Red
Tab. 12-1: LED functions on the XD1 plug

12.1.2 LED block of 10

XF1 XF2
S L S L
XF5
L S
XF30
XD1
ON
UL T
24V 0V
USV 0V
Fig. 12-3: LED block of 10
Bosch Rexroth AG R911340667_Edition 04
Function
24 V supply voltage connected and within the permitted range
All internally programmable function blocks are loaded. These also in-
clude internally programmed function blocks of connected modules.
Loading for internally programmable functions block of an extension
module or of the control failed. In this case, initiate a fallback. Refer to
chapter 12.5 "Fallback and recovery" on page
The temperature is critical.
●
If the control cannot be operated anymore, the maximum tempera-
●
ture was exceeded and the control was switched off. The control
can only be operated when interrupting the voltage.
The messages "Prewarning" and "Shutdown" are displayed at a high
operating temperature together with the diagnostic display of the en-
gineering interface. A temperature display is shown additionally. The
sensor for all these messages is located at a selected position in the
power supply area. The temperature display is only for visual represen-
tation purposes. It displays neither the ambient temperature nor the
indoor temperature of the XM2.
SF2
XF31
IndraControl XM21
s STA
DIA1 ERR
BT
DIA2
DIA3 D
DIA4
E
XG10
SF1
Run
Stop
Clear
IndraControl XM21, XM22 Controls
54.
DIA1
DIA2
DIA3
DIA4
s STA
ERR
BT
D
E