Sd Card; End Clamp; Wear Parts; Ambient Conditions - Bosch rexroth IndraControl XM21 Operating Instructions Manual

IndraControl XM21, XM22 Controls

5.4 SD card

Ordering code
XA-SD01
Tab. 5-4: SD card

5.5 End clamp

Ordering code
SUP-M01-ENDHALTER
Tab. 5-5: End clamp

5.6 Wear parts

There are no wear parts in the controls IndraControl XM21 and XM22.

6 Ambient conditions

Ambient temperature in operation
Ambient temperature during storage and transport -30 °C to +85 °C
Operating altitude
Permitted air humidity
Degree of protection
Protection class
Overvoltage category
Contamination level
Mechanical tests
Vibration resistance acc. to DIN EN 60068-2-6
Shock test acc. to DIN EN 60068-2-27
Broadband noise acc. to DIN EN 60068-2-64
Part number Description
R911173844 SD card 1 GB
Part number Description
R911170685 2 pieces of snap-on end brackets for 35 mm NS 35/7.5
or NS 35/15 carrier plate; width: 9.5 mm
①
Up to 2,000 m: -25 °C to +60 °C
2,000 m to 3,000 m: max. +55 °C
3,000 m to 4,000 m: max. +50 °C
4,000 m to 4,700 m: max. +45 °C
Up to 4,700 m above sea level acc. to DIN 60204
5 % to 95 % acc. to DIN EN 61131-2, no conden-
sation
IP20 acc. to DIN EN 60 529
III, DIN EN 61010-2-201
2
2, no condensation allowed
Oscillations, sinusoidal in all three axes
5 Hz - 9 Hz with 3.5 mm amplitude
9 Hz -150 Hz with 5 g peak acceleration
Shock stress: Shock resistance in all three axes,
11 ms semi-sinusoidal 30 g
5-20-150 Hz with 0.572 g, 5 h per axis
R911340667_Edition 04 Bosch Rexroth AG
7/69
Ambient conditions