Removal; Clean And Disinfect; Maintenance Tasks - Wilo -Rexa MINI3 Series Installation And Operating Instructions Manual

NOTICE! The specifications applicable to
swimming pools also apply to accessible
basins.
1.10

Removal

Wear protective equipment!
ƒ
Product without plug: Have the connection
ƒ
cable disconnected from the mains by a quali-
fied electrician.
Depending on the operating mode and dura-
ƒ
tion, the housing parts become hotter than
40 °C (104 °F).
Only touch the product by the carrying
–
handle.
Allow product to cool down.
–
Clean the device thoroughly.
ƒ
If there is a risk of germ formation, observe
ƒ
the following points:
Ensure sufficient air exchange.
–
Wear a breathing protection mask e.g. 3M
–
Series 6000 with filter 6055 A2
Installation and operating instructions Wilo-Rexa MINI3
Disinfect product.
–
1.11

Clean and disinfect

Wear protective equipment!
ƒ
The protective equipment prevents contact
with germs that are hazardous to health and
the disinfectant.
If a disinfectant is used, follow the manufac-
ƒ
turer's instructions!
Wear protective equipment according to the
–
manufacturer's instructions! If in doubt, ask
your specialist dealer.
Inform all persons about the disinfectant
–
and how to use it correctly!
1.12

Maintenance tasks

Wear protective equipment!
ƒ
Carry out maintenance work in a clean, dry and
ƒ
well-lit place.
Only original parts of the manufacturer may be
ƒ
used. The use of any non-original parts re-
leases the manufacturer from any liability.
en
9