Transport And Storage; Installation And Electrical Connection; Installation Types; Installation - Wilo -Rexa MINI3 Series Installation And Operating Instructions Manual

4

Transport and storage

CAUTION
Soaked packaging may tear!
The product may fall on the ground if unprotected and
may be damaged. Lift wet packaging carefully and replace
it immediately!
ƒ Wear protective equipment!
ƒ Carry the pump by the handle. Never carry or pull on the
connection cable!
ƒ Clean the pump and disinfect if necessary.
ƒ Close the discharge connection.
ƒ Protect the connection cable against kinking and damage.
ƒ Use original packaging for transport and storage.
ƒ Pack the pump when dry. Wet or humid pumps may soften
the packaging.
ƒ Storage conditions:
– Maximum: -15 ... +60 °C (5 ... 140 °F), max. humidity:
90 %, non-condensing
– Recommended: 5 ... 25 °C (41 ... 77 °F), relative humid-
ity: 40 ... 50 %
Installation and operating instructions Wilo-Rexa MINI3
5

Installation and electrical connection

5.1

Installation types

ƒ Stationary wet well installation
ƒ Portable wet well installation
The following installation types are not permitted:
ƒ Dry well installation
ƒ Horizontal installation
5.2

Installation

ƒ Wear protective equipment!
ƒ Do not install a damaged or defective pump.
ƒ Frost-free location.
ƒ Lay the connection cable properly. During operation there
must be no danger (stumbling, damage, etc.).
ƒ Float switch must be able to move freely!
en
15