Replacement Procedure - Infasecure CS8113 Replacement

CS8113, CS9213
7. Once loose under the seat, push back
up through the last slot to completely
disconnect buckle from seat. Put aside
for disposal.
8. Take the new replacement buckle.
Buckle
Buckle Strap
Adjustable
Buckle Plate
9. Under the fabric and foam flap, there are
three holes.
10. Take the adjustable buckle plate and push
the plate down through the right outside
hole.
HARNESS BUCKLE REPLACEMENT
Buckle Plate
110-114 Old Bathurst Road, Emu Plains NSW 2750.
www.infasecure.com.au
On the underside of the seat, move the
11.
harness adjuster strap out of the way and
then thread the adjustable buckle plate up
through the centre hole.
Now take the buckle plate and thread down
12.
through the other outside hole.
Take the screw and reattach through the
13.
botttom hole in the Buckle plate, to secure
it to the restraint.
The restraints harness buckle replacements
has now been completed has now been completed.
d, Emu Plains NSW 2750.
The buckle orientation
should be as seen in the
image on the left.
Customer Care:
AU: 1300 92 4632
NZ: +61 2 4728 8090
customercare@infa.com.au