Page 3
How to install child seat - Forward Facing (8-18kg) How to use for child seat - Forward Facing (8-18kg)
Page 5
HOW TO INSTALL CHILD SEAT - FORWARD FACING (8-18KG) There is a reclined position as well as the normal upright position. To change the recline angle, pull down the base and place the support (B) in position. (Figure 2) Place the restraint in either upright or reclined position, with the back against the back of the vehicle seat, directly in line with the anchorage point.
Page 6
HOW TO USE FOR CHILD SEAT - FORWARD FACING (8-18KG)
Page 10
The upper anchorage strap of the INFA Securé Safe Ride The upper anchorage strap of the child seat must be attached to the Metal Buckle (G) on the child harness tether strap. Refer to Figures (17) & (19) on this page. NOTE: Attachment point on Metal Buckle (G) can some- times be partly obscured by the upper anchorage straps of the harness.
Page 11
To see why excellent results have been achieved with Infa-Securé child restraints, visit eXceed EHP+ O D E L #CS55C N E W M Comfi-Cruiser #CS35 Turn-A-Tot (Rearward Facing) #CS54 Vario-Max #CS56 Travel-Max For more information, products & give-aways visit www.infa-secure.com.au...
Need help?
Do you have a question about the CS55 and is the answer not in the manual?
Questions and answers