Enabling Feature Codes For Use Of The Call Forward Unconditional Feature - SpectraLink IP-DECT Server 400 Interoperability Manual

Spectralink IP-DECT Server 400/6500 and Spectralink DECT Server 2500/8000 Interoperability Guide

Enabling Feature Codes for Use of the Call forward Unconditional Feature

The advanced feature, Call forward unconditional, is accessed by dialing special feature codes
from the DECT handsets. To provide access to the Call forward unconditional feature, the fea-
ture codes must be enabled.
To Enable Feature Codes from the Web Based Administration Page
1. If using Spectralink IP-DECT 400/6500, click Configuration, and then click Wireless
Server.
If using Spectralink DECT 2500/8000, click Configuration, and then click DECT Server.
2. Under Feature codes/SIP Users Feature Codes, mark the Enable check box to make the
Spectralink IP-DECT Server react to the feature codes.
The default features codes can be modified to match local CUCM Feature Access Codes.
3. Click Save.
14205603-IG, Edition 3.0
July 2017, Original document
11