Panasonic NS1000 Manual page 94

3.2 Manual Registration Mode – UT series
1. Registering an UT-PT to the PBX (Manual Registration Mode)
When registering a UT without a local DHCP server OR when registering the UT from a remote
location etc, you will need to enter the IP Address of the UT AND the IP Address of the PBX into the
UT manually (Manual Registration Mode).
1. Connect the UT to the network and
apply power (PoE or AC Adaptor etc)
Now starting...
Setup
2. When the UT powers on, press the
'SETUP' soft-key below the LCD display