NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
Figure 5-20 Setting alarm parameter 1
Step 2 Tap Delay following Return-air temp invalid.
Step 3 Set the value to 5 and tap
Figure 5-21 Setting alarm parameter 2
----End
5.5 Commissioning Guide
5.5.1 Entering Diagnostic Mode
Context
Issue 10 (2019-01-15)
On the diagnostic mode screen, you can turn on or off components, and control their
output ratio.
If you need to manually turn on or off system components in diagnostic mode, log in as
the Admin or Engineer user. Ensure that the smart cooling product is started before
operation.
Copyright © Huawei Technologies Co., Ltd.
, as shown in
Figure
5-21.
5 ACC Introduction
107