Setting Communications Parameters (Ip Settings) - Huawei NetCol8000-A Series User Manual

NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
Figure 5-6 Setting temperature and humidity values
Step 2 Set the parameters by referring to
Table 5-2 Parameter description
Parameter
T/H control type
Return-air temp
set point,
Return-air humid
set point
----End

5.4.4 Setting Communications Parameters (IP Settings)

Context
To set communications parameters, log in as the Admin, or Engineer user.
Procedure
Step 1 On the home screen, choose Settings > Comm Settings > IP Settings.
displayed.
Issue 10 (2019-01-15)
You are not recommended to modify the parameters not listed in
Description
Return-air
Sets the required
humidity and
temperature in a room
or aisle.
Copyright © Huawei Technologies Co., Ltd.
Table 5-2.
Configuration Principle
Return-air: For a hot aisle, select Return-air
to control the temperature and humidity
around the air return vent of the smart cooling
product.
The ACC controls the temperature and
humidity based on the set value. For example,
if Return-air temp set point is set to 30.0,
and Return-air humid set point is set to
25.0, the ACC will control the temperature
and humidity around the return-air vent of the
smart cooling product to a temperature of
30° C and humidity of 25% RH.
5 ACC Introduction
Table 5-2.
Figure 5-7 is
92