How To Restore The Initial Password - Huawei NetCol8000-A Series User Manual

NetCol8000-A(050, 100) In-room Air Cooled Smart
Cooling Product
User Manual
Figure 5-48 Changing the password
----End

5.11 How to Restore the Initial Password

Context
If a user forgets the changed password, the user can use the DIP switch S2 on the main control
board to restore the password to the initial password.


Procedure
Step 1 Disconnect the main power supply of the device.
Issue 10 (2019-01-15)
It is recommended that the password should contain at least two types of characters.
If you forget the password, restore the initial password by referring to
Password.
After password restoration is performed, passwords of all users are restored to initial ones.
Other users may be affected. Therefore, exercise caution when performing password
restoration.
To ensure device security, operate the DIP switch after powering off the main power
supply of the device.
Copyright © Huawei Technologies Co., Ltd.
5 ACC Introduction
5.11 How to Restore the Initial
125