Table of Contents
Advertisement
IBM NetVista
Some options (marked with a triangle
to change the values for the option. Use the cursor arrow keys to scroll
through the items in the submenu.
In this manual, default values are enclosed in parenthesis. Submenu items
are denoted by a triangle
System Summary
This option displays a table of items defining basic information about your
system.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Processor
IDE Primary Master
IDE Primary Slave
IDE Secondary Master
IDE Secondary Slave
Drive A
Drive B
Floppy 3 Mode Support
Video
Base Memory
Extended Memory
Total Memory
↑ ↓ → ← : Move
Enter : Select
F5:Previous Values
Processor
This item displays information about the processor. This is a display only field.
IDE Devices (None)
Your computer has two IDE channels (Primary and Secondary) and each
channel can be installed with one or two devices (Master and Slave). Use
these items to configure each device on the IDE channel.
Press <Enter> to display the IDE submenu:
CMOS Setup Utility – Copyright © 1984 – 2001 Award Software
IDE HDD Auto-Detection
IDE Primary Master
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
↑ ↓ → ← : Move
Enter : Select
F5:Previous Values
) lead to submenus that enable you
.
System Summary
[1.44M, 3.5 in.]
[None]
[Disabled]
[EGA/VGA]
640K
64512K
65536K
+/-/PU/PD:Value:
F10: Save ESC: Exit
F7: Default Settings
IDE Primary Master
Press Enter
[Auto]
[Auto]
0 MB
0
0
0
0
0
+/-/PU/PD:Value:
F10: Save ESC: Exit
F7: Default Settings
33/53
Item Help
Menu Level
Press [Enter] to enter
next page for detail
hard drive settings.
F1:General Help
Item Help
Menu Level
To auto-detect the
HDD's size, head . . . on
this channel
F1:General Help
Advertisement
Table of Contents
