Table of Contents
Advertisement
IBM NetVista
PCI Health Status Option
On system boards that support hardware monitoring, this item lets you
monitor the parameters for critical voltages, critical temperatures, and fan
speeds.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Shutdown Temperature
CPU Vcore
1.80 V
3.30 V
5.00 V
12.0 V
Voltage Battery
Current System Temp
Current CPU Temp
CPU FAN Speed
Chassis FAN Speed
Power FAN Speed
↑ ↓ → ← : Move
Enter : Select
F5:Previous Values
Shutdown Temperature (70°C/158°F)
Enables you to set the maximum temperature the system can reach before
powering down.
System Component Characteristics
These fields provide you with information about the systems current operating
status. You cannot make changes to these fields.
•
CPU Vcore (CPU core voltage)
•
Voltage Battery (battery voltage)
•
Current System Temp (degrees Fahrenheit and Celsius)
•
Current CPU Temp (degrees Fahrenheit and Celsius)
•
CPU fan speed (in RPMs)
•
Chassis FAN Speed (in RPMs)
•
Power FAN Speed (in RPMs)
Load Defaults Option
This option opens a dialog box that lets you install fail-safe defaults for all
appropriate items in the Setup Utility:
Press <Y> and then <Enter> to install the defaults. Press <N> and then
<Enter> to not install the defaults. The fail-safe defaults place no great
demands on the system and are generally stable. If your system is not
functioning correctly, try installing the fail-safe defaults as a first step in getting
PC Health Status
[70 ° C/158 ° F]
+/-/PU/PD:Value:
F10: Save ESC: Exit
F7: Default Settings
45/53
Item Help
Menu Level
F1:General Help
Advertisement
Table of Contents
