Table of Contents
Advertisement
IBM NetVista
External Connector Color Coding
Many connectors now use standard colors as shown in the table below.
Connector
Analog VGA
Audio line-in
Audio line-out
Digital monitor/flat panel
IEEE 1394
Microphone
MIDI/game
Parallel
PS/2-compatible keyboard
PS/2-compatible mouse
Serial
Speaker out/subwoofer
Right-to-left speaker
USB
Video out
SCSI, network, telephone,
modem
Connects Power cords
The voltage selector switch should be preset for your area; however, contact
your local power company if you are uncertain of the voltage for your area.
• If the voltage supply range in your area is 100-127V, set the voltage selector
switch so you can see 115V or 115.
• If the voltage supply range in your area is 200-240V, set the voltage selector
switch so you can see 230V or 230.
Connect the power cords to the computer and monitor first, and then connect
the power cords to the electrical outlets. For clarity, only the power cords are
shown in this picture.
Note:
If your computer has a power switch on the back of the computer, press it in the ON
position (1=ON).
Voltage selection switch is covered by a sticker to avoid accidental access.
Color
Blue
Light blue
Lime
White
Grey
Pink
Gold
Burgundy
Purple
Green
Teal or Turquoise
Orange
Brown
Black
Yellow
None
13/53
Advertisement
Table of Contents
