Cleaning; Descaling (Clean Function) - Krups SAVOY ISOTHERME PROGRAMMABLE INOX 1.7L Manual

PLEASE NOTE: When a delay start is saved, the PROG icon continues to be displayed on the screen.
■ To cancel the delay start, hold down the PROGRAM button
the ON OFF button
5b – AROMA
■ The AROMA function
■ Press the AROMA button
■ The AROMA button
■ The function is stored in memory for the following cycles.
■ To cancel the AROMA function
5c – 1 - 4 CUPS
■ This function is especially intended for preparing small quantities of coffee, from 2 to 4 cups. It improves aroma
extraction.
■ To activate this function, press the button
■ The button
lights up.
■ To cancel the
1 - 4

6. CLEANING

■ To remove the used grounds, remove the filter and filter holder from the coffee maker. Fig. 20a and Fig.
20b.
■ Discard the coffee grounds and the filter paper. Fig. 20a and 20b.
■ Do not clean the appliance if it is still hot.
■ Wash the removable filter holder using hot soapy water.
■ Handle the thermal jug with care: add some washing-up liquid and water, and then gently shake it. Stains
can be removed using a soft brush. Use a non-abrasive sponge.
■ If the jug is heavily stained by coffee, fill it with boiling water. Add a dishwasher tablet and let it soak for
around an hour. Next, rinse it thoroughly.
■ Never put the jug in the dishwasher and do not immerse it in water.
WARNING: Do not use the thermal jug in a microwave oven.
Do not put the parts of the coffee maker in the dishwasher.
■ Clean the coffee maker using a damp soft cloth or sponge. Never use abrasive or strong products on any
part of your coffee maker.
■ To clean the stainless steel parts of your coffee maker, moisten a soft cloth or sponge with hot water. Wipe
them well using a dry cloth.
■ For stubborn stains, use a cloth with some white vinegar.
■ Do not immerse the appliance in water or under the tap.
7. DESCALING
■ Why is Descaling Important?
- Limescale builds up naturally in your coffee maker. Descaling helps to protect the coffee maker, ensure a
longer service life and consistently high-quality coffee over time. Limescale may permanently alter the
appliance's performance.
■ The guarantee does not cover coffee makers that malfunction or cease to operate because they
have not been regularly descaled.
■ When Is It Time to Descale?
- Whenever descaling is required, the indicator light of the CLEAN button (Q) will turn on.
- The frequency of descaling depends on water hardness and the number of coffee cycles. When users
observe signs such as extended cycle lengths, intense boil-off, loud noise levels at the end of the cycle or
stoppage during a cycle, this means that the machine is furred up.
.
increases the length of the cycle to produce a more intense coffee.
(O) to select the intensity of your coffee. Fig. 17.
(O) lights up.
(O), press the AROMA button
(P) before starting the cycle. Fig. 18.
function, press the
for more than 2 seconds
button again.
or by pressing on
(O) again.
9