RadioLink R4FGM User Manual
RadioLink R4FGM User Manual

RadioLink R4FGM User Manual

Fhss, 4-channel receiver with integrated gyro
Hide thumbs Also See for R4FGM:

Advertisement

RadioLink Electronic Ltd
www.radiolink.com
R4FGM
(FHSS)
User Manual
4-channel Receiver with Integrated Gyro
Radiolink Electronic Ltd
www.radiolink.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R4FGM and is the answer not in the manual?

Questions and answers

Summary of Contents for RadioLink R4FGM

  • Page 1 RadioLink Electronic Ltd www.radiolink.com R4FGM (FHSS) User Manual 4-channel Receiver with Integrated Gyro Radiolink Electronic Ltd www.radiolink.com...
  • Page 2 RadioLink Electronic Ltd www.radiolink.com Thanks for purchasing RadioLink 4-channel receiver R4FGM. To fully enjoy the benefits of this product and ensure safety, please read the introduction carefully and set up the device as instructed steps. If any problems found during the operation process, please kindly refer to the manual first. Then you could contact our distributors to find solution or follow our Facebook homepage https://www.facebook.com/radiolinkofficial/to search related key words.
  • Page 3 RadioLink Electronic Ltd www.radiolink.com Content 1. R4FGM ....................2 Introduction ................... 2 Compatible transmitters ......................3 Binding ........................ 3 Telemetry ......................4 Working Modes ....................4 Standard mode ..................... 4 Gyro mode ..................... 4 Gyro Introduction ....................4 Gyro Function .....................
  • Page 4 1. R4FGM Basic introduction 1.1 Compatible transmitters Radiolink R4FGM 2.4G 4-channel receiver with integrated gyro for professional car drifting and high voltage servo supported is compatible with RadioLink 6 Channels radio RC6GS V2, RC6GS, 4 Channels radio RC4GS V2, RC4GS.
  • Page 5 Each receiver has an individual ID code and must bind with transmitter before using. When the binding is done, the ID code will be stored in the transmitter and there’s no need to rebind. Therefore, when a new R4FGM is purchased, binding needs to be done in order to work with transmitter.
  • Page 6 4.2 Gyro Setup A. Gyro Enabled Factory setting is gyro function OFF by default. When power on R4FGM, the gyro will self-check. There are two indicators on R4FGM while always-on GREEN LED meaning working mode WITHOUT gyro.
  • Page 7 When all the above steps are complete, please turn off the transmitter and repower on to test if the receiver is correctly bind with it. Thank you again for choosing RadioLink product.

Table of Contents