RadioLink R6F Manual

Fhss

Radiolink Electronic Limited

www.radiolink.com

R6F

(FHSS)

Radiolink R6F, 2.4GHz 6 channels receiver, gyro integrated and HV servo supported. Compatible

with Radiolink 6 channels pistol grip radio RC6GS, 4 channels pistol grip radio RC4GS, RC4G,

RC3S and 8 channels transmitter T8FB.

How to Match Code with Transmitter:

1. Put the transmitter and the receiver close to each other within 50 centimeters.

2. Turn on the transmitter, then power on the R6F.

3. There is a black button on the R6F, press the binding button in one second until the receiver

light starts blinking and release, after about 8 times blinking, match code success when receiver

signal LED always on.

Installment of receiver antenna：

Table of Contents

Do you have a question about the R6F and is the answer not in the manual?

Page 1 2. Turn on the transmitter, then power on the R6F. 3. There is a black button on the R6F, press the binding button in one second until the receiver light starts blinking and release, after about 8 times blinking, match code success when receiver signal LED always on.
Page 2 Radiolink Electronic Limited www.radiolink.com 1. The antenna must be kept as straight as possible. Otherwise it will reduce the effective range. 2. Large model aircraft may of some metal part interfering signal, in this case the antenna should be placed at side of the model.