Related Manuals for RadioLink R7FG
Summary of Contents for RadioLink R7FG
- Page 1 R7FG (FHSS) INSTRUCTION MANUAL Two-way Transmission PWM&PPM&SBUS Signal Supported 7-channel Receiver with Integrated Gyro...
- Page 2 If any problems found during the operation process, either way listed below can be used as online tech support. 1. Send mails to after_service@radiolink.com.cn and we will answer your question at the earliest. 2. Send private message to us on our Facebook page or leave comments on our YouTube page 3.
-
Page 3: Table Of Contents
RadioLink Electronic Ltd www.radiolink.com Contents 1. R7FG Introduction ............................2 1.1 Compatible transmitters ........................2 1.2 Binding ..............................2 2. Telemetry .................................3 2.1 Telemetry of Signal and RSSI ......................3 2.2 Telemetry of model battery and receiver voltage ................3 3. Subsidiary ID ..............................4 4. -
Page 4: R7Fg Introduction
5. Test the model servo to make sure it can be operated by the transmitter. Note: The binding between your R7FG and RC6GS V3 is already complete by default. Just need to make sure there is the solid light of R7FG and the signal tower in the transmitter. -
Page 5: Telemetry
50 centimeters, it is normal that RSSI value is within the range of 0 to -30dBm. The closer the value is to 0, the stronger the signal is. The range of RSSI value of RadioLink transmitters is from 0 to -99dBm. -
Page 6: Subsidiary Id
ESC while the female end to the battery and the wire with a JST head connects Telemetry (+-) port of R7FG/R8F as below pic shown. No extra module is needed. When connect with success, users can check the battery voltage on the main interface of the transmitter. -
Page 7: Working Modes
RadioLink Electronic Ltd www.radiolink.com 4. Working Modes R7FG has four working modes: R7FG Working Mode Working Mode Mode 1 Mode 2 Mode 3 Mode 4 Note Purple(Red+Bl Indicator Color Green Blue With Gyro Telemetry Port of Model Battery Voltage （ + - ）... -
Page 8: Gyro Introduction
5. Gyro Introduction 5.1 Gyro Function The R7FG integrated gyro for professional car drifting can be enabled and disabled. When it’s enabled, the turning stability can be maximized during competition. When there is false position, gyro function keeps the car straight forward and turn precisely. -
Page 9: R7Fg Specifications
Keeping the receiver in a well sealed plastic bag can avoid humidity and dust, which would possibly make the receiver out of control. When all the above steps are complete, please turn off the transmitter and repower on to test if the receiver is correctly bind with it. Thank you again for choosing RadioLink product.