Related Manuals for RadioLink R4F
Summary of Contents for RadioLink R4F
- Page 1 RadioLink Electronic Ltd www.radiolink.com (FHSS) INSTRUCTION MANUAL www.radiolink.com...
- Page 2 RadioLink Electronic Ltd www.radiolink.com Thanks for purchasing RadioLink 4-channel receiver R4F. To fully enjoy the benefits of this product and ensure safety, please read the introduction carefully and set up the device as instructed steps. If any problems found during the operation process, please kindly refer to the manual first. Then you could contact our distributors to find solution or follow our Facebook homepage https://www.facebook.com/radiolinkofficial...
- Page 3 Each receiver has an individual ID code and must bind with transmitter before using. When the binding is done, the ID code will be stored in the transmitter and there’s no need to rebind. Therefore, when a new R4F is purchased, binding needs to be done in order to work with transmitter. Binding steps 1．Put the transmitter and the receiver close to each other (about 50 centimeters) and power...
- Page 4 Keeping the receiver in a well-sealed plastic bag can avoid humidity and dust, which would possibly make the receiver out of control. When all the above steps are complete, please turn off the transmitter and repower on to test if the receiver is correctly bind with it. Thank you again for choosing RadioLink product.
Need help?
Do you have a question about the R4F and is the answer not in the manual?
Questions and answers