Advertisement
Quick Links
R9DS
(FHSS and DSSS Spread Spectrum)
Radiolink R9DS, 2.4G 9 channels receiver, DSSS and FHSS spread spectrum working
synchronously, use for Radiolink transmitters AT9, AT9S, AT10 and AT10II.
SBUS and PWM signal possible working at the same time.
Two signal working mode:
1. PWM signal working mode:
PWM signal output working mode：red LED indicates PWM signal output, 9 channels totally.
Advertisement
Related Manuals for RadioLink R9DS
Summary of Contents for RadioLink R9DS
- Page 1 R9DS (FHSS and DSSS Spread Spectrum) Radiolink R9DS, 2.4G 9 channels receiver, DSSS and FHSS spread spectrum working synchronously, use for Radiolink transmitters AT9, AT9S, AT10 and AT10II. SBUS and PWM signal possible working at the same time. Two signal working mode: 1.
- Page 3 3. Connect CH3 of R9DS to ESC. 4. There is a black button on the R9DS, use a thin stick/pen press the binding button in one second until the receiver light starts blinking and release, after about 8 times blinking, match code success when receiver signal LED always on.
- Page 4 3. The antenna must be kept away from conductive materials, such as metal and carbon by at least a half inch. The coaxial part of the antenna does not need to follow these guidelines, but do not bend it in a small radius. 4.